Boss Audio Systems BR-800 - Manual (Page 132)

132
Tuning Your Instrument (TUNER)
The BR-800 provides a Chromatic Tuner function that
makes it easy to tune an instrument. The built-in tuner
supports guitar or bass guitar.
Here’s how to tune your guitar.
* Playback or recording is not possible while using the tuner.
First, make sure that:
• Your guitar is connected to the GUITAR/BASS INPUT
jack
• The INPUT SELECT (p. 37) INPUT setting is at
“GUITAR/BASS”
1
Press the [MENU] button.
2
Use the CURSOR [ ] [ ] buttons to move the
cursor to “TUNER,” and press the [ENTER] button.
The TUNER screen will appear.
D_Tuner_Start.eps
3
To turn off the tuner, press the [EXIT] button.
■ Indications while tuning
The BR-800’s built-in tuner shows the reference pitch, note
name, and tuning guide.
fig.06-080-e.eps
The tuning guide indicates the difference between the input
pitch and the displayed note name. If the difference
between the input and the correct pitch is within ±50 cents,
the tuning guide shows the amount of difference.
1
Play a single note on the open string that you’re
tuning.
The display will show the note name that is closest to
the pitch of the string you played.
* You must cleanly play a single note on only the string
you’re tuning.
2
Tune your instrument so that the correct note name of
the string you’re tuning appears in the display.
Standard tuning
Switching to the Tuner
If you don’t want sound to be heard while you’re
tuning, lower the [MASTER] fader.
Tuning
7th
string 6th
string 5th
string 4th
string 3rd
string 2nd
string 1st
string
Guitar B E A D G B E
Bass - - B E A D G
Note name
Reference pitch Tuning guide
BR800_e.book 132 ページ ２０１０年１１月２日 火曜日 午前８時２８分