Boss Audio Systems BR-800 - Manual (Page 139)

139
Editing
Mastering
Using USB
Con
venient
Functions
Appendix
es
Quic
k Star
t
Getting Read
y
to Recor
d
Recor
ding/
Pla
ybac
k
Using Eff
ects
Using Rh
ythm
Initializing an SD Card (FORMAT)
1
Press the [MENU] button.
2
Use the CURSOR [ ] [ ] buttons to move the
cursor to “SD CARD,” and press the [ENTER] button.
D_SD_Format.eps
3
Use the CURSOR [ ] [ ] buttons to move the
cursor to “FORMAT,” and press the [ENTER] button.
D_SD_Format2.eps
4
Press the [ENTER] button.
The confirmation message “Are you sure?” will
appear.
D_SD_Format_Sure.eps
5
Press the [ENTER] button to format the card, or press
the [EXIT] button if you decide to cancel without
formatting.
When you press the [ENTER] button, formatting will
be carried out. You’ll then be returned to the play
screen.
Then the display will indicate “Keep power on! Song
creating...” and a new song will be automatically
created.
When the song has been created, you will return to the
play screen.
• When you format a card, the entire contents of
that card will be lost. Be sure to back up important
data before you continue (p. 124).
• If you format the SD card that’s included with the
BR-800, the demo song data will be lost.
• Before you use a commercially available SD card,
you must format it on the BR-800.
• Make sure that the BR-800’s power is turned off
before you insert or remove an SD card.
Inserting or removing an SD card while the power
is on may destroy the data on the SD card or
damage the SD card itself.
• Depending on the capacity of the SD card,
formatting may take several minutes. This does
not indicate a malfunction. Do not turn off the
power until formatting is completed.
• Never remove the SD card or turn off the power
while the message “Keep power on!” is shown.
Doing so will destroy the data on the SD card or
damage the SD card itself.
BR800_e.book 139 ページ ２０１０年１１月２日 火曜日 午前８時２８分