Boss Audio Systems BR-800 - Manual (Page 51)

Editing
Mastering
Using USB
Con
venient
Functions
Appendix
es
Quic
k Star
t
Getting Read
y
to Recor
d
Recor
ding/
Pla
ybac
k
Using Eff
ects
Using Rh
ythm
51
Simple Recording (SONG SKETCH)
6
Press the [REC] button.
Recording will begin.
The [PLAY] button will light green, and the [REC]
button will light red.
fig.Rec04-e.eps
7
When you’re finished recording, press the [STOP]
button.
The recorded data is saved in the SKETCH folder (p.
118).
The recorded data can be imported into a track.
“Importing song sketch data into a track” (p. 106)
Here’s how to play back a WAV file that was saved in the
SKETCH folder.
1
Press the [SONG SKETCH] button.
The SONG SKETCH screen will appear.
2
Use the CURSOR [ ] [ ] buttons to move the
cursor to the file name, and use the dial to select the
file that you want to play back.
3
Press the [PLAY] button.
Playback will begin.
4
To stop playback, press the [STOP] button.
Here’s how to erase a WAV file.
1
Press the [SONG SKETCH] button.
The SONG SKETCH screen will appear.
2
Use the CURSOR [ ] [ ] buttons to move the
cursor to the file name, and use the dial to select the
file that you want to erase.
3
Press the [MENU] button.
4
Use the CURSOR [ ] [ ] buttons to move the
cursor to “FILE,” and press [ENTER].
5
Use the CURSOR [ ] [ ] buttons to move the
cursor to “ERASE,” and press [ENTER].
The FILE ERASE screen will appear.
D_Song_Sketch_File_Erase.eps
6
If you want to erase the file, press the [ENTER]
button.
The screen will ask “Are you sure?”
7
Press the [ENTER] button
The file will be erased.
* The display will indicate “Keep power on!” while the data is
being updated. Do not turn off the power while this message
is shown.
Playback
Lit Lit
About file names
When a WAV file is saved, a file name will be
automatically assigned as follows.
(Ex.)
_BR_001.WAV
:
_BR_999.WAV
The file name will consist of _BR_ followed by a
sequential number and a file extension of .WAV.
Erasing a WAV File
BR800_e.book 51 ページ ２０１０年１１月２日 火曜日 午前８時２８分