Adjusting the recording level, Selecting the track(s) for recording, Adjusting the recording level” (p. 38) – Boss Audio Systems BR-800 User Manual

Page 38

Advertising
background image

38

Recording

Here’s how to adjust the volume of the recording on the
track.

1

Lower the [MASTER] fader.

2

Turn the [REC LEVEL] knob to approximately the

center position, and slowly raise the [MASTER]

fader.

3

Use the [REC LEVEL] knob to adjust the recording

level.

Adjust the level so that the INPUT level meter moves
within the range of -12 (between -24 and -6)–0 dB.

I

4

Use the [MASTER] fader to adjust the volume

appropriately for monitoring (listening).

* If you use a connection cable that contains a built-in resistor,

the volume on the connected device may be insufficient. In
this case, please use a connection cable that does not contain
a built-in resistor (such as one from the Roland PCS series).

1

Press one of the track 1–7/8 [REC] buttons to select the

track(s) on which recording will occur.

The indicators on the buttons show the track status as
follows.

fig.Rec01.eps

The track(s) that can be selected will depend on the
MODE you selected for INPUT.

Adjusting the Recording
Level

Try to record at the highest volume possible before
the sound begins to distort. If you want to decrease
the monitoring volume, lower the [MASTER] fader.

Selecting the Track(s) for
Recording

Indicator

Explanation

Unlit

Track that will not be recorded

Lit

Track that will be recorded

Blinking

Track that will be loop-recorded (p. 41)

MODE

Explanation

MONO REC

Mono recording using one track.
You can choose one of the tracks
1–4.
You can also record in stereo by
pressing the track 5/6 [REC] or
track 7/8 [REC] button.

STEREO REC

Stereo recording using two tracks.
Press the track 1 [REC] or track 2
[REC] button to select the pair of
tracks 1 and 2, or press the track 3
[REC] or track 4 [REC] button to
select the pair of tracks 3 and 4.

SIMUL REC

Simultaneous recording using two
tracks.
Press the track 1 [REC] or track 2
[REC] button to select the pair of
tracks 1 and 2, or press the track 3
[REC] or track 4 [REC] button to
select the pair of tracks 3 and 4.

4TRACK REC

Simultaneous recording using
four tracks.
Press any one of the track 1–4
[REC] buttons to select the four
tracks 1–4, or press the track 5/6
[REC] or track 7/8 [REC] button to
select the four tracks 5–8.

BR800_e.book 38 ページ 2010年11月2日 火曜日 午前8時28分

Advertising