BNC 1105 Universal Counter User Manual
Page 192
192
192
192
192
//
stat = viWrite(sesn, "CONF:FREQ:RAT (@1),(@2)", 23, &ret);
//
stat = viWrite(sesn, "CONF:FREQ:RAT (@1),(@3)", 23, &ret);
//
stat = viWrite(sesn, "CONF:FREQ:RAT (@2),(@1)", 23, &ret);
//
stat = viWrite(sesn, "CONF:FREQ:RAT (@3),(@1)", 23, &ret);
/*----------------------------------------------------------------------------------*/
/*---------------------------------- Gate Time -----------------------------------*/
stat = viWrite(sesn, (unsigned char *)("FREQ:ARM:SOUR IMM"), 17,
&ret);
stat = viWrite(sesn, (unsigned char *)("FREQ:ARM:STOP:SOUR TIM"), 22,
&ret);
stat = viWrite(sesn, (unsigned char *)("FREQ:ARM:STOP:TIM 1"), 19,
&ret);
/*---------------------------------- Gate Ext -------------------------------------*/
//
stat = viWrite(sesn, "FREQ:ARM:SOUR Ext", 17, &ret);
//
stat = viWrite(sesn, "FREQ:ARM:SLOP POS", 17, &ret);
//
stat = viWrite(sesn, "FREQ:ARM:STOP:SOUR Ext", 22, &ret);
//
stat = viWrite(sesn, "FREQ:ARM:STOP:SOUR TIM", 22, &ret);
//
stat = viWrite(sesn, "FREQ:ARM:STOP:TIM 1", 19, &ret);
/*------------------------------- Gate Auto ---------------------------------------*/
//
stat = viWrite(sesn, "FREQ:ARM:SOUR IMM", 17, &ret);
//
stat = viWrite(sesn, "FREQ:ARM:STOP:SOUR IMM", 22, &ret);
/*-------------------------------- Gate Digits -------------------------------------*/
//
stat = viWrite(sesn, "FREQ:ARM:SOUR IMM", 17, &ret);
//
stat = viWrite(sesn, "FREQ:ARM:STOP:SOUR DIG", 22, &ret);
//
stat = viWrite(sesn, "FREQ:ARM:STOP:DIG 5", 19, &ret);
/*----------------------------------------------------------------------------------*/
/*------------------------------- Scale & Offset ----------------------------------*/
stat = viWrite(sesn, (unsigned char *)("CALC2:LIM:STAT ON"), 17, &ret);
stat = viWrite(sesn, (unsigned char *)("CALC2:LIM:UPP 11MHz"), 19,
&ret);
stat = viWrite(sesn, (unsigned char *)("CALC2:LIM:LOW 9MHz"), 18,
&ret);
stat = viWrite(sesn, (unsigned char *)("CALC2:IMM:AUTO ON"), 17, &ret);
stat = viWrite(sesn, (unsigned char *)("INIT:AUTO OFF"), 13, &ret);
stat = viWrite(sesn, (unsigned char *)("INIT:CONT ON"), 12, &ret);