BNC 1105 Universal Counter - Manual (Page 47)

47 47 47 47
To Enable/Disable Math Calculation with Scale and Offset
1. Press SCALE&OFFSET button.
2. Press the softkey under Scale or Offs to do specific settings.
Remote interface command
Use this command to enable or disable the math operation:
:CALCulate:MATH:STATe OFF︱ON
To Specify the value of Scale
1. Press SCALE&OFFSET button.
2. Press the softkey under Scale. The present value of Scale is then
displayed.
3. Use the numeric keypad or the arrow keys to enter a desired value
(refer to Ch.4.2.1).
SCALE Range: -9.999,999E+12 to -1.000,000E-13
0.000,000
+1.000,000E-13 to +9.999,999E+12
Value Resolution: 7 digits
4. Press the softkey under Done to finish the entry or the softkey under
Cancel to withdraw the changes.
Remote interface command
Use the following command to specify the value of Scale:
:TRACe[:DATA] SCALE,<numeric value>
To Specify the value of Offset
1. Press SCALE&OFFSET button.
2. Press the softkey under Offs. The present value of Offset is then
displayed.
3. Use the numeric keypad or the arrow keys to enter a desired value
(refer to Ch.4.2.1).
Offset Range: -9.999,999,000,0E+12 to -1.000,000,000,0E-13
0.000,000,000,0
+1.000,000,000,0E-13 to +9.999,999,000,0E+12
Value Resolution: 11 digits
4. Press the softkey under Done to finish the entry of this value or the