BNC 1105 Universal Counter - Manual (Page 75)

75 75 75 75
[:VOLTage]:RTIMe?
[:VOLTage]:FALL:TIME?
[:VOLTage]:FTIMe?
[:VOLTage]:PWIDth?
[:VOLTage]:NWIDth?
[:VOLTage]:INITerval?
[:VOLTage]:PTPeak?
[:VOLTage]:MAXimum?
[:VOLTage]:MINimum?
[:VOLTage]:CENTer?
[:VOLTage]:PHASe?
[:VOLTage]:DCYCle?
[:VOLTage]:PDUTycycle?
[:VOLTage]:TOTalize:TIMed?
The [:SENSe] command
The commands [:SENSe] control directly on the instrument-specific setting, but
not the ones related to the signal-oriented characteristics.
[:SENSe]
:DATA? [“[:]SENSe[1]”]
[:SENSe]
:EVENt2:FEED “[:]INPut[1]|[:]INPut2”
:EVENt[1|2]:HYSTeresis:RELative <numeric value> [PCT]
:EVENt[1|2]:LEVel[:ABSolute] <numeric value> [V]
:EVENt[1|2]:LEVel[:AUTO] <Boolean>
:EVENt[1|2]:LEVel:RELative <numeric value> [PCT]
:EVENt[1|2]:SLOPe POSitive|NEGative
:EVENt3:LEVel[:ABSolute]?
:EVENt3:SLOPe?
[:SENSe]
:FREQuency:ARM[:STARt]:SLOPe POSitive|NEGative
:FREQuency:ARM[:STARt]:SOURce IMMediate|EXTernal
:FREQuency:ARM:STOP:DIGits <numeric value>
:FREQuency:ARM:STOP:SLOPe POSitive|NEGative