SkyTrak 6036 Service Manual User Manual

Page 187

Advertising
background image

Section 9.

Hydraulic System

Model 6036 S/N 9B0499 and Before

9-74

Trouble

Probable Cause

Remedy

Check and set relief valve (para 9.1.6).

Install new cartridge or replace valve (para 9.3.5).

Install cylinder seal kit(s) (para 9.2.6).

Check and adjust wheel alignment as needed per
paragraph 5.2.5.

Check and tighten connections at valves, pump
and cylinders. Repair or replace defective hose.

Install cylinder seal kit(s) (para 9.2.6).

Repair or replace power steering unit.

Replace steer select valve (para 9.3.4).

Check and tighten loose connections. Operate
steering to purge system of air.

Repair or replace power steering unit.

Check and tighten connections at valves, pumps
and cylinders. Repair or replace faulty hose(s).

Check and set frame tilt relief valve (para 9.1.4).

Repair cylinder as required (para 9.2.7).

Repair control valve as required (para 9.3.1).

Repair tandem pump (para 9.4.1).

Repair or replace cylinder(s) or check valve (para
9.2.7).

Check and fill hydraulic reservoir as described in
Owners/Operators manual.

Clean or replace filler/breather.

Clean strainer as described in Owners/Operators
manual.

Clean or replace suction line and/or tighten if
loose.

Steer relief valve not set
correctly

Defective sequence valve

Steering cylinder leakage

Wheel misalignment

External leakage in system

Internal leakage in cylinder

Internal leakage in power
steering unit

Defective steer select valve

Air in steering lines

Faulty power steering unit

External fluid leakage at
tubes, hoses or fittings

Faulty relief valve setting

Internal leakage in cylinder

Internal leakage in control
valve

Defective tandem pump

Leakage in auxiliary
cylinder(s)

Low level in reservoir

Filler/breather on reservoir
is dirty

Suction strainer clogged

Suction line is restricted or
loose

Steers too Slowly

Front or Rear Wheels
Not Parallel in 2- or 4-
Wheel Steering

Steering is Spongy or
Noisy

Auxiliary Equipment
Slow or Malfunctions

Auxiliary Equipment
Drifts or Creeps

Tandem Pump Fails to
Deliver Fluid

Advertising