SkyTrak 6036 Operation Manual - Manual (Page 13)

Page 7 6036/6036T
operating the vehicle in a new work area.
Prevent accidents when you move the vehicle
around the work site. Know the rules for movement
of people and vehicles on the work site. Follow the
instructions of signals and signs.
DO NOT operate the vehicle unless:
• all four tires are correctly filled with hydrofill,
• all safety equipment is in proper working condition,
• all covers and shields are in place, and
• all safety and instructional decals are in place and
readable.
(Replace all missing, illegible, or damaged decals.)
2. Clearances
Always check clearances carefully before driving
under electrical lines, bridges, etc.
3. Underground Hazards
Know the location of all underground hazards
before operating this vehicle in a new work area.
Electrical cables, gas pipes, water pipes, sewers, or
other underground objects can cause injury or
death. Contact your local underground utility
service or diggers hotline to mark all underground
hazards.
OG0380
Operational Considerations
1. Preparation and Prevention
Know the location and function of all vehicle con-
trols.
Make sure all persons are away from the vehicle
and that the Travel Select Lever is in the "N"
(Neutral) position with the emergency brake switch
engaged before starting the engine.
Holes, obstructions, debris and other work area
hazards can cause injury or death. Always walk
around and look for these and other hazards before