Engine cooling system, Page 52 – SkyTrak 6036 Operation Manual User Manual

Page 58

Advertising
background image

Page 52

6036/6036T

OA0242

Figure 27

COOLANT
OVERFLOW BOTTLE

OIL FILL CAP

OIL FILTER

DIPSTICK

2.

Unlock and open the right rear engine access
door. Check level of coolant in overflow bottle
(Figure 27). When coolant is hot, bottle should be
1/2 to 3/4 full. When coolant is cool, bottle should
be 1/4 to 1/2 full. Add coolant as required through
the overflow bottle (50/50 mixture of ethylene
glycol and water). Close and lock access door.

Figure 26

OF0120

WING NUT

SAFETY ELEMENT

3.

Engine Cooling System

A.

Level Check (Daily or 10 Hour Intervals)

1.

Level the vehicle, ground the carriage, place travel
select lever in Neutral (N), engage the emergency
brake switch and shut off the engine.

C. Air Intake System - Inspection (250 Hour Intervals)

Inspect the intake piping for cracked hoses, loose
clamps, or punctures which can allow dirt or debris to
enter the combustion chamber. If dirt or debris is
allowed to enter the combustion chamber, it can
severely damage the engine. If necessary tighten or
replace parts to prevent air intake system leakage.

Advertising