Apple Logic Express 8 - Manual (Page 326)

326 Chapter 13 Creating Your Arrangement
Moving Regions to the Current Playhead Position
You can use the Pickup Clock (Move Event to Playhead Position) key command to move
the selected region (or the first of several selected regions) to the current playhead
position. If more than one region is selected, all subsequent regions are moved.
Note: If you use this command on audio regions, the anchor of the region is placed at
the current playhead position (see “
Editing the Audio Region Anchor ” on page 303).
Moving Audio Regions Back to Their Original Record Positions
You can move any selected audio region back to its original recorded position by
choosing Audio > Move Region to Original Record Position (or using the Set Region(s)
to Recording Position key command).
Note: This command only works if the audio file includes a time stamp. Examples of
time stamped files include those recorded in the current project, and imported
Broadcast Wave or SDII files. Time stamped files are indicated by a clock symbol to the
right of the file name in the Audio Bin window (not Audio Bin tab).
Nudging Regions
You can use the following key commands to nudge (move to the right or left) selected
regions by the corresponding grid amount:
 Nudge Region/Event Position Right by SMPTE Frame
 Nudge Region/Event Position Left by SMPTE Frame
 Nudge Region/Event Position Right by 1/2 SMPTE Frame
 Nudge Region/Event Position Left by 1/2 SMPTE Frame
 Nudge Region/Event Position Right by 5 SMPTE Frames
 Nudge Region/Event Position Left by 5 SMPTE Frames
 Nudge Region/Event Position Right by SMPTE Bit
 Nudge Region/Event Position Left by SMPTE Bit
 Nudge Region/Event Position Right by Tick
 Nudge Region/Event Position Left by Tick
 Nudge Region/Event Position Right by Division
Time stamped audio file