Apple Logic Express 8 - Manual (Page 635)

Chapter 27 Bouncing Your Project 635
Burn Options
Choose the Burn: (CDDA or DVD-A) name (and activate the checkbox) in the
Destination pane to access the following options:
Logic Express can directly burn Red Book audio to blank CDs or DVD-Audio to blank
DVDs.
 When CDDA is chosen: If the selected sample rate (chosen in the PCM panel) is higher
than 44.1 kHz, a copy of the bounced PCM file is created—with an automatic sample
rate conversion to 44.1 kHz before encoding. This conversion takes place because the
CD Audio format (Red Book) does not support sampling rates higher than 44.1 kHz.
 When DVD-A is chosen: Any sample rate up to 192 kHz can be used for stereo files.
Simulate Write Only
The “Simulate write only” option, as the name suggests, simulates a CD/DVD burn, but
does not write data to the blank media. This can be used either alone, or in conjunction
with, the “Write as multi session” option (if burning a CD).
Write As Multi Session (Only Available When CDDA is Chosen in the Mode Menu)
The “Write as multi session” option allows you to add a data session to the same CD at
a later date—to add the project folder, for example.
Device
This menu allows you to choose between any recognized CD/DVD burners connected
to your system.
Note: If your system contains multiple burners, the first one detected is chosen as the
default.
Speed
The first time you use the Speed pull-down menu, a request is made to the burning
mechanism, which may take a while. Once the scan is complete, you may freely select
from the available speeds.