Displaying the waveform as sample bits – Apple Logic Express 8 User Manual
Page 521
Chapter 21
Editing Audio in the Sample Editor
521
To enter the absolute display mode, do one of the following:
m
Open the Sample Editor from the Arrange window.
m
Activate Link mode in the Sample Editor, and select a region in the Arrange area.
Time is measured from the start of the project, which is assigned a value of zero (or
position: 1 1 1 1 in bar/beat terms). In this viewing mode, the absolute (project) time is
shown in the ruler.
Displaying the Waveform as Sample Bits
You can switch from the usual representation of the waveform to one that shows the
structure of the recorded digital data—at high magnification levels on the detailed
waveform display. This viewing mode is useful when eliminating clicks and pops from
your recordings, for example.
To display the waveform as sample bits:
m
Enable the View > Show as Sample & Hold.