transfer case oil, Approved universal tractor fluid, A. transfer case oil level check – Lull 944E-42 Operation Manual User Manual

Page 133: 250 hour intervals), Transfer case oil, General maintenance

Advertising
background image

General Maintenance

131

Model 944E

Origin 3/04

A. Transfer Case Oil Level
Check

(250 Hour Intervals)

1. Place the vehicle on level

ground, ground the attach-
ment, level the vehicle side-to-side, place the travel select lever in the (N)
NEUTRAL DETENT position, engage the park brake switch and shut off
the engine.

2. Clean the area around the transfer case oil fill/level plug (4).

3. Remove the oil fill/level plug from the transfer case and check the oil level.

4. Add oil as required through the oil fill/level plug hole (4). Bring the oil level

up even with the oil fill/level plug hole. Refer to the chart on this page for oil
recommendations.

5. Clean and re-install the oil fill/level plug (4) and torque to 26 lb-ft (35 Nm).

11. Transfer Case Oil

Approved Universal Tractor Fluid

JOHN DEERE

FORD/NEW HOLLAND

MASSEY FERGUSON

CHEVRON

JDM J20C (HY-GARD)

ESN-M2C134-D (HYDRAULIC OIL 134)

M-1141 (PERMATRAN lll)

CHEVRON 1000 THF

250

OH2710

OU0560

OU0810

4

Advertising