Rear window latch (closed cab only), Front windshield (closed cab only), Operation – Lull 944E-42 Operation Manual User Manual

Page 62

Advertising
background image

60

Model 944E

Origin 3/04

Operation

Rear Window Latch (Closed Cab Only)

The rear window (1) can be partially opened and secured in place with the rear
window latch. To open the window, grab the latch handle (2), PULL UP and then
push the window OUTWARD. To close and secure the window, pull the latch handle
UP and then INWARD.

NOTE: In an emergency situation, the operator can exit through the rear window
opening by removing the latch pin (3) on the window latch. The window is then free
to swing open.

Front Windshield (Closed Cab Only)

Windshield Removal

1. The front windshield (4) can be removed from the cab to provide additional

ventilation.

2. Remove the windshield wiper arm assembly (5) from the wiper shaft. Rein-

stall the two nuts (6) onto the shafts to protect the threads of each shaft.
Store the wiper arm assembly in a safe place.

3. To remove the windshield, remove the five capscrews (7) holding the lower

retainer plate (8) to the cab. Remove the retainer plate.

4. Carefully push the bottom of the windshield out. Pull the top of the wind-

shield out from under the top retainer (9). Store the windshield in a safe
place.

2.

3.

1.

OU0920

3

1

2

Advertising