Lull 944E-42 Operation Manual - Manual (Page 58)

56 Model 944E Origin 3/04
Operation
Parking Lights, Headlights & High/Low
Beam Switch
These lights will only work when the ignition switch is in
the RUN position. Use the turn signal switch (1) to control the high/low beam
headlights and to turn ON the parking lights and headlights.
Turn the twist grip end (2) of the turn signal switch counterclockwise to the first
position (3) to turn the parking lights ON. Turn the twist grip to the second position
(4) to turn the headlights and parking lights ON. Turn the twist grip clockwise to the
OFF position (5) to turn all the lights OFF. Pull the turn signal switch toward you to
switch from low beam to high beam. When the high beam is ON the high beam
indicator light on the front dash panel will illuminate.
OS1900
OU0651
1
2
3
4
5