Lull 944E-42 Operation Manual - Manual (Page 63)

Operation
61 Model 944E Origin 3/04
Windshield Installation
IMPORTANT! Be sure the windshield retainer plate is secured in place after
installing the windshield back into the cab. Never operate the vehicle with the
windshield in place and the retainer plate missing.
1. With the seal bulb on the windshield toward the cab, place the top of the
windshield under the upper retainer (9). Push the windshield up as far as
possible.
2. Place the bottom of the windshield (4) into the windshield opening in the
cab. Secure the windshield in place with the lower retainer plate (8) and the
five capscrews (7). Tighten all five capscrews securely to hold the wind-
shield in place.
3. Remove the two nuts (6) from the wiper arm shafts. Reassemble the wiper
arm assembly (5) to the shafts and secure in place with the two nuts.
Reconnect the washer hose to the hose barb.
OU1010
6
4
5
7
8
9