Lull 944E-42 Operation Manual - Manual (Page 19)

Safety Practices
17 Model 944E Origin 3/04
6. Elevating Personnel
Use only a compliant work platform meeting the ASME B56.6 standards for
lifting and lowering personnel. NEVER transport personnel in a work platform
for even the shortest distance.
Death or serious personal injury can occur if these rules are not obeyed. Riders
can fall and be crushed or run over. Avoid accidents.
For other specific precautions, See ìElevating Personnelî on page 89.
7. Transfer Carriage Operation
Before any operation of the PlaceAceô transfer carriage is started, be sure to
clear the path of travel in front of the boom and the transfer carriage of any
personnel or objects.
Be sure there is enough room in front of the boom for complete transfer carriage
movement.
IMPORTANT! When transfer carriage movement is started in the forward direction,
the lifting capacity of the vehicle will be reduced. Refer to ìUsing the Capacity Chartî
on page 71 and the ìLoad Chartî section at the end of this manual for vehicle
capacities during transfer carriage operation.
If load cannot be safely transfered forward, position the vehicle closer to the
landing point of the load.
WARNING
Allow no riders
AVOID
CRUSHING,
falling off
vehicle can
cause death
or serious
injury
FALLING OFF ATTACHMENT,
can result in death or
serious injury.
DO NOT TRAVEL
with personnel in
a work platform.
4110389
Lift or lower personnel
only in a compliant
work platform.
WARNING
OU0620
OH3180