Lull 944E-42 Operation Manual - Manual (Page 140)

138 Model 944E Origin 3/04
General Maintenance
A. Wheel End Oil
Level Check
(250 Hour Intervals)
1. Position the vehicle on level ground, move the vehicle forward or backward
enough to ensure that the lower edge of the wheel end (1) fill/drain plug
hole (2) is positioned horizontally (3).
2. Ground the attachment, place the travel select lever in the (N) NEUTRAL
DETENT position, engage the parking brake switch and shut off the
engine.
3. Clean the area around the wheel end fill/drain plug (2). Slowly remove the
plug. Check the oil level.
4. Add Universal Tractor Fluid to bring the oil level up and even with the plug
hole.
5. Clean and re-install the wheel end fill/drain plug (2). Torque to 37 lb-ft
(50 Nm).
14. Wheel End Oil
WARNING:
DO NOT perform service or maintenance on this
vehicle with the engine running. Contact with moving parts can cause
death or serious personal injury.
Approved Universal Tractor Fluid
JOHN DEERE
FORD/NEW HOLLAND
MASSEY FERGUSON
CHEVRON
JDM J20C (HY-GARD)
ESN-M2C134-D (HYDRAULIC OIL 134)
M-1141 (PERMATRAN lll)
CHEVRON 1000 THF
OU0590
250
OH2710
OT02802
2
1
3