Lull 944E-42 Operation Manual - Manual (Page 44)

42 Model 944E Origin 3/04
Operation
Joystick Operation (Single Joystick Option)
The single joystick option is an assembly containing a single joystick (1) to control
boom functions, auxiliary hydraulics, attachment tilt and the PlaceAceô transfer
carriage operation. The frame sway is controlled by a separate frame sway joystick
(2) which is located behind the single joystick assembly.
The joystick can be operated in two separate modes of operation: without button (3)
depressed ìBoom Lift/Lower and Extend/Retractî (Default Mode) and with button (3)
depressed and held ìTransfer Carriage Extend/Retract and Auxiliary Hydraulic Male
Pressurized/Female Pressurizedî (Secondary Mode). The joystick also has a thumb
control (4), on the topside of the joystick, for attachment tilt control which operates in
either mode.
IMPORTANT! The button (3) must be held against the joystick handle during
operation of the Secondary Mode. Releasing the button (3) from the Secondary
Mode will immediately change the joystick back to the Default Mode of operation.
OU1201
2
1
3
4