Lull 944E-42 Operation Manual - Manual (Page 68)

66 Model 944E Origin 3/04
Operation
Quick Attach
This vehicle is equipped with a quick attach system for easy attachment changing.
Attachment Removal
Be sure you are performing this procedure on level ground.
1. Come to a complete stop, place the travel select lever in the (N) NEUTRAL
DETENT position and engage the parking brake switch.
2. Extend the boom approximately 10 feet (3 meters) and tilt the carriage
backward.
3. Exit the vehicle using both hand holds.
4. Raise the quick attach pin lock lever (1) and pull out the pin (2) at the bot-
tom of the quick attach link (3).
5. Return to the operators compartment, fasten the seat belt and lower the
attachment to the ground in a level position. Tilt the attachment forward.
This will rotate the quick attach link back away from the attachment.
6. Lower and then retract the boom until the ends of the attachment pivot pin
has disconnected from the attachment.
Carriages
OS03312
3
1
2