ElmoMC ExtrIQ Digital Servo Drives-Solo Hornet - Manual (Page 16)

Solo Hornet Installation Guide Installation
MAN-SOLHRNIG (Ver. 1.003)
www.elmomc.com
16
Chapter 4: Installation
The Solo Hornet must be installed in a suitable environment and properly connected to its
voltage supplies and the motor.
4.1. Site Requirements
You can guarantee the safe operation of the Solo Hornet drive by ensuring that it is installed in
an appropriate environment.
Feature Value
Ambient operating temperature -40 °C to +70 °C (-40 °F to 160 °F)
Maximum operating altitude 12,000 m (39370 feet)
Maximum non-condensing humidity 95%
Operating area atmosphere No flammable gases or vapors permitted in area
Caution: The Solo Hornet drive dissipates heat by convection. The maximum
operating ambient temperature of 0 °C to 40 °C (32 °F to 104° F) must not be
exceeded.
4.2. Unpacking the Drive
Before you begin working with the Solo Hornet, verify that you have all of the components, as
follows:
• The Solo Hornet servo drive
• The Composer software and software manual
The Solo Hornet is shipped in a cardboard box with Styrofoam protection.
To unpack the Solo Hornet:
1. Carefully remove the servo drive from the box and the Styrofoam.
2. Check the drive to ensure that there is no visible damage to the instrument. If any damage
has occurred, report it immediately to the carrier that delivered your drive.