ElmoMC ExtrIQ Digital Servo Drives-Solo Hornet - Manual (Page 21)

Solo Hornet Installation Guide Installation
MAN-SOLHRNIG (Ver. 1.003)
www.elmomc.com
21
4.5. Motor Power
4.5.1. Connecting Motor Power
Connect the M1, M2, M3 and PE pins on the Solo Hornet. The phase connection is arbitrary as
the Composer will establish the proper commutation automatically during setup. However, if
you plan to copy the setup to other drives, then the phase order on all copy drives must be the
same.
Figure 4: AC Motor Power Connection Diagram