ElmoMC SimplIQ Servo Drives Composer User Manual - Manual (Page 79)

3.10 Downloading Firmware
To download a new firmware version
1. Select Tools – Firmware Download. The Firmware Download dialog box will be
displayed:
2. Type the full path and name of the data (*.abs) file to be downloaded, or click
Browse and browse to the file. You may check the With loading current application
option to indicate that the firmware should be loaded when the current application
is downloaded. The loading process will begin and a status bar will indicate the
progress. All other windows will be deactivated during downloading. Upon
completion of the download, the following message will be displayed:
Firmware Download was Completed Successfully!
PLEASE REBOOT THE AMPLIFIER and CLICK OK!
3. Reboot the drive and click OK.
To check that the firmware has been downloaded successfully, re-establish
communication. Then use the Smart Terminal to send the VR command for checking the
present firmware version number.
Elmo Composer User Manual Using the Composer
MAN-COMPUM (Ver. 1.9)
3-29