Exporting task settings to usb – HMC Electronics ASG-SD2500-10FX-SY X-PAQ Precision Fastening System User Manual
Page 19
Page 19
Exporting Task Settings to USB
The ASG-CT2500 controller is capable of exporting the task settings to USB for backup and transfer to
other ASG-CT2500 controllers. To accomplish this, insert a USB flash drive with available memory to the
port on the controller.
From the ‘Run Tool’ screen, tap the task name at the top to bring up the ‘Task Setup’ menu
When a USB drive is inserted, the ‘Export Task Files’ button is displayed. Tapping this button will
automatically save the setting files for all 12 tasks in the controller to the USB. The settings will be saved
in the directory: \[Controller Name]\Config Where [Controller Name} is the user defined name
programmed into the ‘Name’ box in the ‘Controller Info’ screen (see Controller Info section of this
manual for more information). This is the same directory you must navigate to when importing a task
file as well.
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440