HMC Electronics ASG-SD2500-10FX-SY X-PAQ Precision Fastening System - Manual (Page 38)

To adjust the threshold, use the up and down arrow keys to move the green bar up or down the slider.
To test, push the lever or pull chuck to move the white bar up to the green threshold bar
tool begins to run when desired.
Tool Calibration
To view the calibration value of the tool connected to the controller, tap the ‘Tool Cal’ button on the
‘System’ screen. The calibration value will be displayed, and can be modified if required.
CAUTION: Tapping on the Calibration Value will take you
manually changed. This screen is for qualified calibration technicians only.
calibration value of the tool could lead to inaccurate torque readings and potential tool damage.
Page 38
adjust the threshold, use the up and down arrow keys to move the green bar up or down the slider.
To test, push the lever or pull chuck to move the white bar up to the green threshold bar
To view the calibration value of the tool connected to the controller, tap the ‘Tool Cal’ button on the
‘System’ screen. The calibration value will be displayed, and can be modified if required.
: Tapping on the Calibration Value will take you to a screen where the value can be
This screen is for qualified calibration technicians only. Improperly changing the
calibration value of the tool could lead to inaccurate torque readings and potential tool damage.
adjust the threshold, use the up and down arrow keys to move the green bar up or down the slider.
To test, push the lever or pull chuck to move the white bar up to the green threshold bar and verify the
To view the calibration value of the tool connected to the controller, tap the ‘Tool Cal’ button on the
‘System’ screen. The calibration value will be displayed, and can be modified if required.
to a screen where the value can be
Improperly changing the
calibration value of the tool could lead to inaccurate torque readings and potential tool damage.
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440