System setup screen, Passwords – HMC Electronics ASG-SD2500-10FX-SY X-PAQ Precision Fastening System User Manual
Page 35
Page 35
System Setup Screen
The ‘System Setup’ screen allows the user to set system controls and tool settings. See the following
sections for further information.
Passwords
From the ‘System Setup’ screen, tap the ‘Passwords’ button. The controller allows (3) individual
passwords, each password allows access to the controller when locked. Each password allows full
access to unlock the controller. When a controller is locked, the controller will still navigate to most
screens and settings will be viewable. If it is locked and a user tries to access a protected field, the
controller will prompt for a password to allow access.
Creating a User(s)/Password(s): Tap an available user button and enter a User Name when prompted.
Next enter a password, and then confirm the password. The controller will return to the ‘Passwords’
screen, and the entered user name should be visible in one of the buttons. Return to the ‘Setup’ screen
by tapping the [<<] button twice. You will notice that the screen appears differently than before, many
of the fields are “greyed-out” signifying that the controller is locked and those fields are no longer
accessible.
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440