HMC Electronics ASG-SD2500-10FX-SY X-PAQ Precision Fastening System User Manual
Page 36
Modifying features in a locked controller
and tap the appropriate button or number. The controller will then prompt the user for a password to
unlock the controller. Once a password is accepted, settings can be changed on any screen. To re
the controller again after modifications hav
corner of the ‘Run Tool’ screen.
Deleting User(s)/Password(s): From the ‘Passwords’ screen, tap the name of the user that is to be
deleted, enter the password when prompted. The screen will sh
create a button next to that user called ‘Delete User’. Tap the ‘Delete User’ button to remove the user
from the controller.
NOTE: It is recommended that one ID and password be programmed and stored in a safe
location to prevent from accidental locking of the controller that is left unlocked.
Page 36
Modifying features in a locked controller: Navigate to the setting or feature that needs to be mod
and tap the appropriate button or number. The controller will then prompt the user for a password to
unlock the controller. Once a password is accepted, settings can be changed on any screen. To re
the controller again after modifications have been made, tap the ‘Lock’ button at the bottom
From the ‘Passwords’ screen, tap the name of the user that is to be
deleted, enter the password when prompted. The screen will show that the password is now active, and
create a button next to that user called ‘Delete User’. Tap the ‘Delete User’ button to remove the user
: It is recommended that one ID and password be programmed and stored in a safe
ocation to prevent from accidental locking of the controller that is left unlocked.
: Navigate to the setting or feature that needs to be modified
and tap the appropriate button or number. The controller will then prompt the user for a password to
unlock the controller. Once a password is accepted, settings can be changed on any screen. To re-lock
bottom right-hand
From the ‘Passwords’ screen, tap the name of the user that is to be
ow that the password is now active, and
create a button next to that user called ‘Delete User’. Tap the ‘Delete User’ button to remove the user
: It is recommended that one ID and password be programmed and stored in a safe
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
(800) 482-4440