HYDAC HMG 3010 - Manual (Page 10)

HMG 3010 Seite 10
Stand 11/2011 - V04 R01 Mat.-Nr.: 669855
4.2 Connections
E F G H J
A B C D I Y adapter
4 sensor input sockets* each with two measurement channels (channel A – D or
E – H) to connect up to 8 analogue sensors or up to 4 SMART sensors, e.g. for
pressure, temperature or flow rate sensors.
The four input sockets can be doubled, if required, by plugging in Y adapters (ZBE
38).
For connection to CAN-bus:
For connection to CAN-bus, use connection adapter ZBE 3010 (see Point 6.5).
Caution!
When connecting to CAN-bus, a Y-adapter cannot be used on this input socket.
1 input socket for
-2 digital signals, e.g. for frequency or speed measurements (channel I, J)
Female jack for power supply
1 USB connector for PC communication
1 serial interface for PC communication
*
For overview table of measuring inputs / input signals, see Point 6.6 Technical Specifications
DC IN
RS232
USB
B - F
I / J
DC IN
RS232
USB
D / H
C - G
D - H
A - E