HYDAC HMG 3010 - Manual (Page 38)

HMG 3010 Page 38
Edition 11/2011 - V04 R01 Part No.: 669855
6.2 Recording Menu
Here the HMG enables you to perform a
measurement for a specific period of time
and save it. This recording can be rendered
as a graph or a table. To do this, proceed as
follows: To access the recording menu, go to
the Current Measured Values menu, then
select Recording in the function bar at the
bottom. In the Recording menu that follows,
select Start recording, View recording or
Delete recordings, using navigation keys
and confirm with OK.
6.2.1 Starting a Recording
The Start recording option takes you to a
menu which lists the individual measurement
parameters which can be set for making a
recording. When selecting the first item, Re-
cording, a drop-down list appears in which
you can choose between Simple measure-
ment curve, Measurement curve with
trigger or Event log. Select appropriate
recording option followed by OK.
Select Simple measurement curve to make
additional parameter settings:
Measurement channels
The active measurement channels are
shown here. Confirm with OK. You now
proceed to the Change Settings of
Measurement Channels menu. All of the
settings you can make here are described
in detail in the Changing the Settings of
the Measurement Channels section of
Settings Menu. Before starting your re-
cording you can now also decide whether
you want to switch off individual channels
(X = "off").
Caution!
Don't forget to reactivate the
measurement channels after com-
pleting your measurement, assum-
ing they are still needed.