HYDAC HMG 3010 - Manual (Page 54)

HMG 3010 Page 54
Edition 11/2011 - V04 R01 Part No.: 669855
The Comment item enables you to enter a
text, e.g. a description indicating the opera-
tional status of the unit or system while the
recording was being made. The HMG saves
the measurement settings together with each
recording so that a detailed measurement
log is created.
Note:
For the same example, if you select automatic measurement Activated and start the meas-
urement with Start, you are asked to allocate a Name and a Number to the measurement.
The measurement is then stored under this name with the next consecutive number. In the
function bar on the screen you also see the Autostop function. The measurement currently
running can be ended by selecting Stop. This measurement will then be saved and a new
measurement will start automatically. To end automatic measurement, select Autostop fol-
lowed by OK. The measurement that was just running is resumed and can be ended again
by selecting Stop.