HYDAC HMG 3010 - Manual (Page 33)

HMG 3010 Page 33
Edition 11/2011 - V04 R01 Part No.: 669855
6.1.4 Changing the Initial Setup
Change initial setup is a submenu of the
Settings menu.
To make changes to the initial setup, press
OK. You can now change the following
items:
Language
You can choose between German, English
and French.
- Select your language using the arrow
keys, followed by OK.
Setting/Correcting the Date and Time
Various format options are offered depend-
ing on the language selected and the asso-
ciated regional formatting applicable to the
date and time. Make your selection, followed
by OK. Then enter the actual date and/or
time of day using the number pad.
- Save by pressing OK.
Automatic Measurement Units
This subitem refers only to HSI sensors with
automatic sensor detection. When the sen-
sors are connected, the unit of measurement
of the sensor is read out and automatically
adopted.
If, for example, you want all pressure
transmitters with automatic sensor detec-
tion to show psi readings, you can make
this setting here.
For a connected 0 ... 100 bar pressure
transmitter, the HMG then shows the meas-
ured values in a measurement range of 0 ...
1450 psi, i.e. the measurement range and
the unit of measurement are automatically
converted.