HYDAC HMG 3010 - Manual (Page 40)

HMG 3010 Page 40
Edition 11/2011 - V04 R01 Part No.: 669855
The sampling rate which can be set is also
dependent on the active measurement
channels:
• 0.1 ms max. 2 analogue input channels
• 0.2 ms max. 4 analogue input channels
• 0.5 ms all 10 input channels
• 1.0 ms for SMART sensors
Recording time
A drop-down list appears when this item is
selected. Using the arrow keys (▲) and (▼)
you can select a recording time of between 1
second and 24 hours, followed by OK.
Similar to when changing the Sampling rate,
information is shown at the bottom of the
display pertaining to the recorded data show-
ing you the result of your setting.
Recording option
The options available here are End when
time has elapsed and Record continu-
ously until terminated.
End when time has elapsed means that
recording is discontinued when the time en-
tered in Recording time has elapsed.
Record continuously until terminated
means that the oldest measured values to be
deleted when new measured values are
added once the time entered in Recording
time has elapsed. The time period entered in
Recording time remains as the "past" in
relation to the actual time in the measured
value memory until the Stop command is
given (Stop + OK or actuate the Esc key).