HYDAC HMG 3010 - Manual (Page 63)

HMG 3010 Page 63
Edition 11/2011 - V04 R01 Part No.: 669855
In the list of channels, select a channel to
the right next to the box, and confirm with
OK. In the next menu you see an overview
of the measurement range, current scaling
(upper and lower limit) of the y-axis, line
style and colour in which the measured
values of this sensor is shown. You can re-
set all the parameter settings except for the
measurement range.
The default scaling (upper and lower limit)
can be manually changed here via the key-
pad. This is one of the various options of-
fered by the HMG 3010 to enlarge interest-
ing parts of graphs. After confirming the
Lower limit line with OK, you can change
the value.
Save your entry with OK. You are now in the
next line. If required, the upper limit can be
reset in exactly the same way.
For Line style a drop-down list appears of-
fering you a choice of Solid line, Dotted
line, and Dash-dotted line. Make your se-
lection, confirming with OK.
Colour: use the arrow keys to select various
colours from a list (confirming with OK). This
enables the rendering of every channel to be
adapted according to your preferences.
Back takes you back to the list containing
the measurement channels. The Time
range is shown above the function bar; it
can also be adapted manually as needed.
Select a value and enter another time pe-
riod of interest to you via the keypad (+
OK).
After selecting Graph in the function bar,
press OK to return to the graph.