HYDAC HMG 3010 - Manual (Page 72)

HMG 3010 Page 72
Edition 11/2011 - V04 R01 Part No.: 669855
After selecting a recording and the Trans-
fer option, you see the following screen:
Now you can determine whether the se-
lected recording is to be stored in the
HMG
3010 under the combination of
name+number, or whether you would like
to assign a new designation.
6.4.2.4 Sensor Dialogue
This menu enables you to modify the con-
figuration of the SMART sensor.
Note that what is shown in this menu de-
pends on the SMART sensor connected.
For detailed information on the possible
settings, please refer to the particular sen-
sor documentation.
6.4.2.5 Administer Sensor Configura-
tion
Here you have the possibility of reading
the current configuration of the SMART
sensor, or transferring saved settings into
the SMART sensor.
You can also have a saved configuration
displayed or deleted.
Read configuration from sensor
This menu item enables you to read the
configuration of the SMART sensor and
transfer it to the HMG 3010. You can ac-
cept the suggested name+number combi-
nation, or enter a new one.