HYDAC HMG 3010 - Manual (Page 44)

HMG 3010 Page 44
Edition 11/2011 - V04 R01 Part No.: 669855
Measurement Curve with Trigger
Measurement curve with trigger is another
recording option. Trigger means that a
measurement curve can be started auto-
matically when one or more specific events
occur. Examples of events are when a limit is
exceeded or not achieved, or when a meas-
urement departs from a measurement win-
dow.
When selecting Measurement curve with
trigger, you see other parameters which can
be set in addition to the setting parameters
available for Simple measurement curve
(Measurement channels, Sampling rate, and
Recording time, Automatic operation and
Zoomed area). The additional settings are
Trigger settings and Pre/Post trigger.
Select Trigger setting + OK. In the menu
which follows you can specify up to 4 differ-
ent trigger events (event 1 to 4). To activate
an event, select the relevant box by pressing
OK so that a checkmark appears. The event
used last is shown next to the checkbox.
(What appears in the display varies accord-
ing to the event used last.) Use the arrow
keys to navigate to the right to the event box,
and confirm with OK.
In Trigger event ..., confirm with OK. The
following list of trigger events is displayed:
• Actuation of button/key
• External signal change
• Specific value
• Leaving measurement window
• Timed
Select the appropriate option for your meas-
urement task.