HYDAC HMG 3010 - Manual (Page 29)

HMG 3010 Page 29
Edition 11/2011 - V04 R01 Part No.: 669855
6.1.2 Changing Display Settings
The next submenu of the Change Display
Settings item enables you to make settings
affecting the display and rendering of meas-
ured values and the display size in keeping
with your measurement task. Select the item
using the arrow keys, followed by OK.
When selecting Measured value dis-
play, a drop-down list appears ena-
bling you to choose the rendering
speed:
• Fast
• Medium
• Slow
• Delayed
Make your selection, followed by OK.
For Measured value rendering you can
choose between the measured value table
and various 7-segment display formats (1
display panel, 2 display panels, ..., Set
automatically).
When selecting Set automatically, the HMG
automatically searches for the optimal ren-
dering. When two sensors are connected
and activated, the display looks like this
screenshot.
Note!
The settings for displaying the measured
value has no impact on the measurement
itself. It is just to make the display easier
to read, e.g. during pulsations.