JUMO 705001 mTRON T - Central Processing Unit Operating Manual - Manual (Page 124)

9 Program editor
124
Icon
Up to 100 icons are available in a pool. The following screenshot shows a list of the icons avail-
able by default, with a preview image for the selected icon.
"Replace" button: The selected icon is replaced by different icon, which must be selected from
a file directory as a graphic in BMP format (max. 32 × 32 pixels; 256 colors). During this pro-
cess, the name that is used for the icon in the list can be changed so that it is different to the
file name. If the "Transparent import" option is active (checkbox selected), white areas in the
icon become transparent in the multifunction panel.
"Export" button: The selected icon is saved in a file directory as a graphic in BMP format.
Tol high
(Upper limit of tol-
erance band)
-99999 to 0 to +99999
The limits depend on the minimum and
maximum admissible upper limit of the
tolerance band for the program genera-
tor.
Upper limit value for tolerance band
monitoring of setpoint value 1
Operating
contacts Activation of operating contacts by selection (drop-down list)
Selected (checkmark) Operating contact is active
Active operating contacts are displayed
in the "Operating contacts" field.
Not selected Operating contact is not active
OK Select the button Before the entered values are accepted,
it is checked whether the setpoint values
and the tolerance band limits lie within
the limits which have been defined in the
program generator configuration.
OK with check Select the button The whole program plan is checked
whether the limits which have been
defined in the program generator confi-
guration are not exceeded.
Parameter Selection/settings Description