2 setpoint limits, 6 configuration – JUMO 705001 mTRON T - Central Processing Unit Operating Manual User Manual
Page 93
93
6 Configuration
6.11.2
Setpoint limits
This window is used to specify the setpoint value limits (setpoint value 1 to 4) and tolerance
band limits (setpoint value 1) for each of the three program channels. The number of decimal
places can also be set and an individual designation can be specified for each setpoint value.
The setpoint value limits, tolerance band limit (for setpoint value 1), and the step or ramp set-
point input are set for each of the four setpoint values of a relevant program channel.
Setup dialog
Parameters
Parameter
Selection/settings
Description
Setpoint value 1 to 4
Minimum
-99999 to -9999 to +99999
Minimum admissible setpoint value
Maximum
-99999 to 9999 to +99999
Maximum admissible setpoint value
Decimal places
Auto
Number of decimal places is selected
automatically.
XXXX.
No decimal places
XXX.X
One decimal place
XX.XX
Two decimal places
X.XXX
Three decimal places
Name
Use default name or edit text.
(Max. 16 characters)
Name of the setpoint value