JUMO 705001 mTRON T - Central Processing Unit Operating Manual - Manual (Page 125)

125
9 Program editor
Allocation
To execute a program, at least one program generator must be selected. A program can be
executed via up to 9 program generators at the same time.
If multiple programs are executed at the same time, these must be assigned different program
generators.
If multiple program generators are assigned to a program, the program generator with the low-
est number (1 to 9) determines which setpoint value input limits are valid for program entry and
for temporary changes.
Generator configuration
Use the "Generator configuration" button to open this window:
The individual sub-items and parameters for generator configuration are described in this sec-
tion:
Chapter 6.11 "Program generator", page 89
No.
To create a program, the individual program sections are programmed consecutively. Up to 100
program sections can be defined in this way.
Program sections can be copied, inserted at different positions, and edited if necessary.