Lenze Loader L-force Loader - Manual (Page 18)

L-force Loader
Operation
How to select a target system
18 DMS 4.0 EN - 07/2007
L
5.2 How to select a target system
For selecting a target system, you can perform an automatic search for devices connected
to the bus system.
M
How to perform an automatic search:
1. Click Find devices to find the devices connected to the bus system.
• The progress of scanning will be indicated by a progress bar.
• At the end of scanning, the Select target system dialog box will appear:
2. Select the desired target system from the tree.
3. Click OK to confirm your selection.
• The selection is accepted and the dialog box is closed.
• The selected target system is displayed in the dialog area:
Next steps:
 How to build up a connection with the target system
(C 19)