Lenze Loader L-force Loader - Manual (Page 24)

L-force Loader
Operation
How to select files for the download
24 DMS 4.0 EN - 07/2007
L
5.4.4 How to open a 9400 application
Click Open 9400 application to open an application created for the "L-force 9400 Servo
Drives" series with the L-force Engineer for the download.
O
Tip!
If you want to create an L-force Loader file (*.lfl) with the Engineer, select Export
L-force Loader file... in the project view of the controller's context menu.
• File name and target directory of the L-force Loader file (*.lfl) to be output can be
freely selected.
M
How to open an L-force 9400 application...
1. Select the Open 9400 application function in the function area.
2. Select the desired L-force Loader file (*.lfl) in the Open 9400 application dialog box.
3. Click OK to confirm your selection.
• The selection is accepted and the dialog box is closed.
r If the 9400 application could be opened properly,
– the Close 9400 application function will be available instead of the Open 9400
application function. Use this function to close the 9400 application.
– the Download... function will be provided to download the file(s) to the target
system.
– the dialog area will display information about the opened application in the 9400
application tab.
r If it is not possible to open the 9400 application properly, an error message with an
error number is displayed.  Error numbers, causes & remedies
(C 36)
Next steps:
 How to download data
(C 25)
Note!
For the »L-force Loader«, the 9400 application to be opened must be present in
the form of an L-force Loader file (*.lfl). This file contains the application data
required in a compressed manner.