Lenze Loader L-force Loader - Manual (Page 19)

L
DMS 4.0 EN - 07/2007 19
L-force Loader
Operation
How to build up a connection with the target system
5.3 How to build up a connection with the target system
M
Click Log in in the function area to build up a connection to the selected target
system.
r If the connection has been established successfully, the »L-force Loader« changes from
offline to online mode and the status bar indicates the communication status "Online"
and the device address.
– For Lenze PLCs, the PLC program status is indicated as well.
– For L-force 9400 Servo Drives, the application status is indicated as well.
r If question marks (???) appear in the dialog area after log in, the target system is not
supported by the »L-force Loader«.
r If it is not possible to build up a connection, an error message with an error number will
be displayed. A list of all error numbers and their meanings can be found in the
appendix.  Error numbers, causes & remedies
(C 36)
Next steps:
 How to select files for the download (C 20)