Lenze Loader L-force Loader - Manual (Page 21)

L
DMS 4.0 EN - 07/2007 21
L-force Loader
Operation
How to select files for the download
5.4.1 How to open a DDS binary file
If the target system has PLC functionality (e.g. 9300 Servo PLC and Drive PLC), this function
can be used to open a DDS binary file for the download.
r All binary formats as of Drive PLC Developer Studio (DDS) version 1.0 are supported.
M
How to open a DDS binary file...
1. Select DDS binary file... in the function area.
2. Select the desired file in the Open DDS binary file dialog box.
3. Click OK to confirm your selection.
• The selection is accepted and the dialog box is closed.
r If the binary file could be opened properly,
– the Close DDS binary file function will be available instead of the DDS binary file...
function. Use this function to close the binary file.
– the Download... function will be provided to download the file(s) to the target
system.
– the dialog area will display information about the opened binary file in the Binary file
tab.
r If it is not possible to open the binary file properly, an error message with an error
number will be displayed.  Error numbers, causes & remedies
(C 36)
Next steps:
 How to open application data
(C 22)
/  How to open a GDC parameter set file
(C 23)
or
 How to download data
(C 25)