RKI Instruments GX-2009 Manual - Manual (Page 57)

GX-2009 Operator’s Manual User Setup Mode • 52
Setting the Password
You can password protect entry into the User Setup Mode with the
password feature. Entering the PASSWORD menu item allows you to turn
this feature on or off and enter a password if you turn it on.
The factory setting for the password feature is oFF.
1. At the PASSWORD screen, press and release the POWER MODE
button. A screen will appear that shows the current password feature
setting.
2. Press and release the air button to change the displayed setting. When
the desired setting is displayed, press and release the POWER MODE
button to save the setting.
3. If the password feature was set to oFF, the unit will exit the
PASSWORD menu item and return to the PASSWORD screen.
With the password feature set to oFF, you will be able to enter User
Setup Mode without entering a password.
4. If the password feature was set to on, the following screen will appear
with the first digit flashing prompting you to enter the password you
want to use.
5. Use the AIR button to scroll through the numbers 0 - 9.
6. When the desired number is displayed for the first digit, press and
release the POWER MODE button to save the number.
7. The next digit will begin flashing.
PASSWORD
oFF
PASSWORD
PASSWORD
0 0 0 0
PASSWORD