RKI Instruments GX-2009 Manual - Manual (Page 8)

3 • Specifications GX-2009 Operator’s Manual
NOTE: The bump test function in Calibration Mode is included in
instruments with firmware version 03955 or later installed. See
page 40 for a description of the bump test function. GX-2009
instruments shipped after May 2011 include the bump test
function. Instruments that have a serial number starting with
04516 or later shipped from the factory with the bump test function
available. Instruments that have a serial number starting with
04515 did not include the bump test function when shipped from
the factory. The factory setting for the bump test function is off.
Continuous
Operating
Hours Up to 20 Hours (Non Alarm Operation After Full Charge)
Charge Time 3 hours for a full charge
Case High-impact Plastic, Dust and Water Resistant to IP-67
Required
Accessories AC or DC Charging Station, AC Charging Station Available For From
1 to 5 Instruments
Other
Accessories • IrDA/USB cable for downloading data to computer
• GX-2009 Data Logger Management Program (Windows
®
2000,
XP, Vista)
• GX-2009 Setup Program (Windows
®
2000, XP, Vista)
• Automatic Calibration Station
• Hand Aspirated Sample Draw Adapter with Hose and Probe
• Wrist Strap (included with every unit)
Dimensions
and Weight Dimensions: 2.7 H, 3.0 W, 1.0 D inches
Approx. 70 H, 75 W, 25 D mm
Weight: 4.6 oz.
*The GX-2009 is also available set up for general hydrocarbons and calibrated to a
combustible gas other than methane, such as isobutane. Consult RKI Instruments,
Inc. for further information.
Table 1: Model GX-2009 Specifications