Sensaphone 400 User Manual
Page 117
Advertising
Appendix B: Troubleshooting
115
Sound level monItorIng
Problem
Cause
Solution
1. False high sound
alarms occur
frequently.
The programmed sound
sensitivity results in over-
sensitivity to non-alarm
sound as well as alarm
sound.
Sound Recognition Time is
too short.
Reprogram the sound sen-
sitivity.
Refer to Chapter 5, Section
5.10.
Lengthen the sound
Recognition Time.
Refer to Chapter 5, Section
5.10.
2. High sound does not
cause an alarm.
The unit is not close
enough to the high sound
source, or the programmed
sound setting results in a
lack of sensitivity to high
sound.
Move the unit closer or
reprogram the sound sen-
sitivity.
Refer to Chapter 5, Section
5.10.
Advertising