Sensaphone 400 - Manual (Page 64)

62
SENSAPHONE 400 User’s Manual
4 .14 maxImum number oF CallS (max CallS)
The Max Calls feature controls the total number of repeated calling
attempts by the Model 400 in the event of an alarm. When an alarm occurs,
the dial-out process begins, and continues to cycle through your pro-
grammed telephone numbers until the alarm is acknowledged or until the
maximum number of calls is reached. The Max Calls setting regulates the
number of calls that will be made as a result of any alarms; if more than
one alarm is detected at once, or if a second alarm occurs during dial-out
on the first alarm, the Max Calls setting will start the calling process from
zero, until the programmed number of calling attempts are completed.
The default setting for Max Calls is 100, but it may be programmed from 1
to 255 calls. Max Calls is cancelled when an alarm is acknowledged. If the
maximum number of calls is completed and no alarm acknowledgement
has occurred, the Model 400 will automatically acknowledge any alarm and
stop the dial-out.
NOTE: If only one telephone number is programmed, the Model 400
will dial out a maximum of 15 times to report an alarm in accordance
with FCC rules.
4 .14 .1 programmIng max CallS
To program Max Calls:
1. Press SET.
SET
2. Press MAX CALLS.
4
MAX CALLS
The Model 400 will respond: “Enter number.”
3. Using the number keys, enter a value. The Model 400 will recite the dig-
its as you press them.
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
8
CLOCK
3
INTERCALL
TIME
7
RECOGNITION
TIME
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
1
CALL
DELAY
2
VOICE
REPS