Sensaphone 400 - Manual (Page 60)

58
SENSAPHONE 400 User’s Manual
2. Press CALL DELAY.
1
CALL
DELAY
The Model 400 will recite the programmed Call Delay.
4 .11 loCal voICe mute
When the Model 400 dials out to report an alarm, it also audibly recites the
alarm message through it’s speaker. The Local Voice Mute command allows
you to turn off the speaker at the Model 400’s site during alarm dialouts
and status call-ins. This feature is used to prevent intruders or unauthor-
ized persons from hearing the alarm dial-out message or from hearing the
Status Report during an off-site call.
4 .11 .1 enable/dISable loCal voICe mute
To enable/disable Local Voice Mute:
1. Press SENSOR ON/OFF.
SENSOR
ON/OFF
2. Press MUTE.
CODE
LOCK
MUTE
The Model 400 will say “Mute On” to indicate that Local Voice Mute is
enabled, or “Mute Off” to indicate that it is disabled.
3. Repeat key sequence to switch between enabled or disabled Local Voice
Mute.