Network connection - windows vista – Rockwell Automation 1492-PRINT110_PRINT220 ClearMark Printer User Manual User Manual

Page 37

Advertising
background image

Rockwell Automation Publication 1492-UM008A-EN-P - June 2010

3-15

Installing the Printer Driver Chapter 3

Figure 3.28 - Installation of the Printer Driver Successful

7.

After you click [Finish], the installation of the printer driver is finished.

Network Connection - Windows VISTA

1.

On the printer press the Menu key, the arrow keys and the Enter key to
select the submenu 'Host interface' followed by 'Network setup' and 'IP
address'.

2.

Press the Enter key again to display the IP address of the printer.

3.

Now enter <http://IP address/ipp> in your Web browser (please enter the
printer IP address using the following format: XXX.XXX.XXX). If the IP
address contains blocks with less than three digits per block, please add
leading zeroes (for example, 10 -> 010).

The System window will now open and display the hostname of the printer
'RNPAXXXXX'. Here XXXXX represents a figure.

If you are unable to open the web address that you have just entered you
may have to deactivate the proxy server just to enable you to gain access to
this page. Proceed as follows to access this option in the Internet Explorer:
click the 'Tools' menu then 'Internet options', click the 'Connections' tab
and then click the 'LAN settings' button. Now uncheck the option 'Use a
proxy server for your LAN'.

Advertising